Samfurin kuma aka sani da
- Alkyd baƙin ƙarfe-mica fenti, fenti mai tsaka-tsakin baƙin ƙarfe-mica, fenti na tsaka-tsakin baƙin ƙarfe-mica, fenti na tsaka-tsakin alkyd, fentin tsaka-tsakin alkyd.
Mahimman sigogi
| Samfurin Turanci sunan | Alkyd Cloud baƙin ƙarfe fenti |
| Kaya Masu Hatsari No. | 33646 |
| Majalisar Dinkin Duniya No. | 1263 |
| Ƙunƙarar ƙarfi mai ƙarfi | 64 daidaitaccen mita³. |
| Alamar | Jinhui Paint |
| Model No. | C52-2 |
| Launi | Grey |
| rabon hadawa | Bangaren guda ɗaya |
| Bayyanar | Fili mai laushi |
Abun da ke ciki
- Alkyd Mica Iron Paint ya ƙunshi alkyd guduro, mica iron oxide, antirust pigment filler, Additives, No.200 sauran ƙarfi man fetur da kuma gauraye sauran ƙarfi, catalytic wakili da sauransu.
Halaye
- Fim ɗin fenti mai tauri, kyakkyawan hatimi, kyakkyawan aikin rigakafin tsatsa, na iya jure tasirin bambancin zafin jiki. Ƙarfin cikawa mai ƙarfi.
- Kyakkyawan aiki mai dacewa, kyakkyawan haɗin gwiwa tare da alkyd primer da alkyd top gashi.
- Kyakkyawan aikin gini.
- Ƙarfafa mannewa, kyawawan kayan aikin injiniya.
- Babban abun ciki na pigment, kyakkyawan aikin sanding.
- Fentin fim ɗin anti-chalking, kyakkyawan aikin kariya, haske mai kyau da riƙe launi, launi mai haske, kyakkyawan dorewa.
Pre-course matching
- Fentin kai tsaye a saman karfe wanda tsatsansa ya kai darajar Sa2.5, ko goga a saman alkyd primer.
Daidaiton hanyar baya
- Alkyd fenti.
Marufi
- kilogiram 25
Maganin saman
- Kayan aikin lantarki don cire tsatsa zuwa matakin St3.
- Sandblasting karfe surface zuwa Sa2.5 grade, surface roughness 30um-75um.
Siffofin fasaha: GB/T 25251-2010
- Matsayi a cikin akwati: babu lumps mai wuya bayan motsawa da haɗuwa, a cikin yanayi iri ɗaya.
- Adhesion: aji na farko (misali ma'auni: GB/T1720-1979(89))
- Juriya na ruwan gishiri: 3% NaCl, 48h ba tare da fatattaka ba, blistering, peeling (misali ma'auni: GB/T9274-88)
- Lokacin bushewa: bushewar ƙasa ≤ 5h, bushewa mai ƙarfi ≤ 24h (misali ma'auni: GB/T1728-79)
- Kyakkyawan: ≤60um (Madaidaicin ma'auni: GB/T6753.1-2007)
Ma'ajiyar sufuri
- Ya kamata a adana samfurin a wuri mai sanyi da iska, hana shi daga hasken rana kai tsaye, kuma a keɓe shi daga tushen wuta, nesa da tushen zafi a cikin ma'ajiyar.
- Ya kamata a hana samfurori daga ruwan sama, hasken rana, guje wa karo lokacin da ake jigilar su, kuma ya kamata su bi ka'idodin da suka dace na sashen sufuri.
Kariyar Tsaro
- Wurin da ake ginin ya kamata ya kasance yana da ingantattun hanyoyin samun iska, kuma masu fenti su sanya tabarau, safar hannu, abin rufe fuska, da sauransu don guje wa kamuwa da fata da shakar hazo na fenti.
- An hana hayaki da wuta sosai a wurin ginin.
Amfani
- Dace da karfe surface, inji surface, bututu surface, kayan aiki surface, itace surface.
Gina zane
- Bayan bude ganga, dole ne a motsa shi a ko'ina, a bar shi ya tsaya, kuma bayan balagagge na minti 30, ƙara adadin da ya dace na bakin ciki da daidaitawa da danko na ginin.
- Diluent: diluent na musamman don jerin alkyd.
- Airless spraying: Dilution adadin ne 0-5% (ta nauyi rabo na fenti), bututun ƙarfe caliber ne 0.4mm-0.5mm, spraying matsa lamba ne 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Air spraying: Dilution adadin ne 10-15% (ta nauyi rabo na fenti), bututun ƙarfe caliber ne 1.5mm-2.0mm, spraying matsa lamba ne 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Nadi shafi: Dilution adadin ne 5-10% (cikin sharuddan fenti nauyi rabo).
Siffofin gini
| Nasihar fim mai kauri | 60-80m |
| Ka'idar sashi | game da 120g/m² (dangane da fim ɗin busassun 35um, ban da asara) |
| Yawan riguna da aka ba da shawarar | 2 ~ 3 |
| Yanayin ajiya | -10 ~ 40 ℃ |
| zafin gini | 5 ~ 40 ℃. |
| Lokacin gwaji | 6h ku |
| Hanyar gini | Brushing, iska fesa, mirgina iya zama. |
| Tazarar sutura
| Substrate zafin jiki 5-10 15-20 25-30 |
| Gajeren tazara h 48 24 12 | |
| Tsawon lokaci bai kamata ya wuce kwanaki 7 ba. | |
| Dole ne zafin jiki ya kasance fiye da 3 ℃ sama da raɓa. Lokacin da ƙananan zafin jiki ya kasance ƙasa da 5 ℃, fim ɗin fenti ba zai warke ba kuma bai kamata a gina shi ba. | |
Matakan kariya
- A cikin yanayin yanayin zafi mai girma, mai sauƙin bushewa, don guje wa bushewar bushewa za a iya daidaita shi da bakin ciki har sai ya bushe.
- ƙwararrun ma'aikatan fenti ya kamata su yi amfani da wannan samfurin bisa ga umarnin kan fakitin samfurin ko wannan jagorar.
- Duk sutura da amfani da wannan samfur dole ne a aiwatar da su daidai da duk ƙa'idodin kiwon lafiya, aminci da muhalli masu dacewa.
- Idan kuna shakka ko ya kamata a yi amfani da wannan samfurin, da fatan za a tuntuɓi sashen sabis na fasaha don cikakkun bayanai.
