Laƙabin samfur
- Alkyd antirust fenti, alkyd baƙin ƙarfe jan fenti, alkyd primer, alkyd launin toka primer, alkyd anticorrosion primer.
Mahimman sigogi
| Samfurin Turanci sunan | Alkyd iron ja anti-lalata primer |
| Kaya Masu Hatsari No. | 33646 |
| Majalisar Dinkin Duniya No. | 1263 |
| Ƙunƙarar ƙarfi mai ƙarfi | 64 daidaitaccen mita³. |
| Alamar | Jinhui Coatings |
| Samfura | C52-1-2 |
| Launi | Iron ja, launin toka |
| rabon hadawa | Bangaren guda ɗaya |
| Bayyanar | Fili mai laushi |
Abun da ke ciki
- Alkyd Iron Red Anti-lalata Primer ya ƙunshi guduro alkyd, baƙin ƙarfe oxide ja, antirust pigment filler, additives, No.200 sauran ƙarfi man fetur da gauraye kaushi, da bushewa wakili.
Halaye
- Fentin fim ɗin anti-chalking, kyakkyawan aikin kariya, kyakkyawar riƙewar haske da riƙe launi, launi mai haske, kyakkyawan dorewa.
- Kyakkyawan mannewa, kyawawan kayan aikin injiniya.
- Ƙarfin cikawa mai ƙarfi.
- Babban abun ciki na pigment, kyakkyawan aikin sanding.
- Bad a cikin juriya mai ƙarfi (man fetur, barasa, da dai sauransu), juriya na acid da alkali, juriya na sinadarai, saurin bushewa.
- Kyakkyawan aiki mai dacewa, kyakkyawar haɗuwa tare da alkyd saman gashi.
- Fim ɗin fenti mai tauri, kyakkyawan hatimi, kyakkyawan aikin rigakafin tsatsa, na iya jure tasirin bambancin zafin jiki.
- Kyakkyawan aikin gini.
Amfani
- Dace da saman karfe, kayan aikin injin, bututun bututu, kayan aiki, saman katako; Alkyd primer za a iya amfani da shi azaman madaidaicin fenti na magnetic alkyd tare da manyan buƙatun kayan ado, kuma ya dace da amfani da saman katako da ƙarfe; Alkyd primer ana amfani dashi kawai don dacewa da shawarar fentin alkyd da kuma dacewa da fentin nitro, fentin kwalta, fenti na phenol-formaldehyde da dai sauransu, kuma ba za a iya amfani da shi azaman madaidaicin fenti na antirust don fenti mai sassa biyu da ƙarfi mai ƙarfi. fenti.
Gina zane
- Bayan bude ganga, dole ne a motsa shi a ko'ina, a bar shi ya tsaya, kuma bayan balagagge na minti 30, ƙara adadin da ya dace na bakin ciki da daidaitawa da danko na ginin.
- Diluent: diluent na musamman don jerin alkyd.
- Airless spraying: Dilution adadin ne 0-5% (ta nauyi rabo na fenti), bututun ƙarfe caliber ne 0.4mm-0.5mm, spraying matsa lamba ne 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Air spraying: Dilution adadin ne 10-15% (ta nauyi rabo na fenti), bututun ƙarfe caliber ne 1.5mm-2.0mm, spraying matsa lamba ne 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Nadi shafi: Dilution adadin ne 5-10% (ta fenti nauyi rabo)
Maganin saman
- Karfe saman sandblasting jiyya zuwa Sa2.5 grade, surface roughness 30um-75um.
- Rushe tsatsa na kayan aikin lantarki zuwa matakin St3.
Gabatar karatun gaba
- Fenti kai tsaye a saman saman karfe wanda tsatsawar cirewar ingancinsa ya kai darajar Sa2.5.
Daidaiton hanyar baya
- Alkyd mica fenti, alkyd fenti.
Siffofin fasaha: GB/T 25251-2010
- Matsayi a cikin akwati: babu kullu mai wuya bayan motsawa da haɗuwa, a cikin yanayin kama.
- Kyakkyawan: ≤50um (misali ma'auni: GB/T6753.1-2007)
- Lokacin bushewa: bushewa saman ≤5h, bushewa mai ƙarfi ≤24h (daidaitaccen ma'auni: GB/T1728-79)
- Juriya na ruwan gishiri: 3% NaCl, 24h ba tare da fatattaka ba, blistering, peeling (misali ma'auni: GB/T9274-88)
Siffofin gini
| Nasihar fim mai kauri | 60-80m |
| Yawan riguna da aka ba da shawarar | 2 ~ 3 |
| Lokacin gwaji | 6h ku |
| Yanayin ajiya | -10 ~ 40 ℃ |
| Ka'idar sashi | game da 120g/m² (35um busassun fim, ban da asara) |
| zafin gini | 5 ~ 40 ℃ |
| Hanyar gini | Ana iya amfani da goge, fesa iska, mirgina. |
| Zazzabi na substrate dole ne ya zama sama da 3 ℃ sama da raɓa. Lokacin da zafin jiki na substrate ya kasance ƙasa da 5 ℃, fim ɗin fenti ba zai warke ba, kuma bai dace da ginin ba. | |
Matakan kariya
- A cikin yanayin yanayin zafi mai girma, mai sauƙin bushewa, don guje wa bushewar bushewa za a iya daidaita shi da bakin ciki har sai ya bushe.
- ƙwararrun ma'aikatan fenti ya kamata su yi amfani da wannan samfurin bisa ga umarnin kan fakitin samfurin ko wannan jagorar.
- Duk sutura da amfani da wannan samfur dole ne a aiwatar da su daidai da duk ƙa'idodin kiwon lafiya, aminci da muhalli masu dacewa.
- Idan kuna shakka ko ya kamata a yi amfani da wannan samfurin, da fatan za a tuntuɓi sashen sabis na fasaha don cikakkun bayanai.
Marufi
- kilogiram 25
Sufuri da ajiya
- Ya kamata a adana samfurin a wuri mai sanyi da iska, a hana shi daga hasken rana kai tsaye, kuma a keɓe shi daga tushen ƙonewa, nesa da tushen zafi a cikin sito.
- Lokacin jigilar samfur, yakamata a hana shi daga ruwan sama, hasken rana, guje wa karo, kuma yakamata ya bi ƙa'idodin da suka dace na sashin zirga-zirga.
Kariyar Tsaro
- Wurin da ake ginin ya kamata ya kasance yana da ingantattun hanyoyin samun iska, kuma masu fenti su sanya tabarau, safar hannu, abin rufe fuska, da sauransu don guje wa kamuwa da fata da shakar hazo na fenti.
- An haramta shan taba da wuta sosai a wurin ginin.
