shafi_banner

Magani

Alkyd fenti

Laƙabin samfur

Alkyd Magnetic Paint, Alkyd top coat, alkyd fenti, alkyd anticorrosive fenti, alkyd anticorrosive saman gashi, alkyd Magnetic saman gashi.

Mahimman sigogi

Turanci sunan samfurin Alkyd fenti
Sunan samfurin Sinanci Alkyd fenti
Kaya Masu Hatsari No. 33646
Majalisar Dinkin Duniya No. 1263
Ƙunƙarar ƙarfi mai ƙarfi 64 daidaitaccen mita³.
Alamar Jinhui Paint
Model No. C52-5-1
Launi Mai launi
rabon hadawa Bangaren-daya
Bayyanar Fili mai laushi

Abun da ke ciki

Alkyd Paint yana kunshe da guduro alkyd, additives, man fetur No.200 da sauran kaushi mai gauraye, da mai kara kuzari.

Maganin Sama

● Karfe saman sandblasting jiyya zuwa Sa2.5 grade, surface roughness 30um-75um.

● Kayan aikin lantarki don cire tsatsa zuwa matakin St3.

Pre-course Matching

Alkyd primer, alkyd matsakaici fenti.

Halaye

  • Ƙarfafa mannewa, kyawawan kayan aikin injiniya.
  • Ƙarfin cikawa mai ƙarfi.
  • Babban abun ciki na pigment, kyakkyawan aikin sanding.
  • Kyakkyawan juriya na yanayi, sheki da tauri.
  • Kyakkyawan mannewa ga karfe da itace, da wasu juriya na ruwa da juriya na ruwan gishiri.
  • Fim ɗin fenti mai tauri, kyakkyawan hatimi, kyakkyawan aikin rigakafin tsatsa, na iya jure tasirin bambancin zafin jiki.
  • Kyakkyawan aikin gini.
  • Fim ɗin fenti yana da anti-chalking, tare da kyakkyawan aikin kariya, haske mai kyau da riƙe launi, launi mai haske da kuma dorewa mai kyau.

Amfani

Dace da na cikin gida da kuma waje karfe surface da itace kariya da kuma ado, ne a general-manufa fenti, yadu amfani a yi, inji, motoci da kuma iri-iri na ado masana'antu.

aikace-aikace-1

Siffofin fasaha: GB/T 25251-2010

  • Matsayi a cikin akwati: babu kullu mai wuya bayan motsawa da haɗuwa, a cikin yanayin kama.
  • Kyakkyawan: ≤40um (misali ma'auni: GB/T6753.1-2007)
  • Abubuwan da ba sa canzawa: ≥50% (misali ma'auni: GB/T1725-2007)
  • Juriya na ruwa: 8h ba tare da fatattaka ba, blistering ko peeling (Ma'anar daidaitaccen: GB/T9274-88)
  • Juriya na ruwan gishiri: 3% NaCl, 48h ba tare da fatattaka ba, blistering da peeling (daidaitaccen ma'auni: GB/T9274-88)
  • Lokacin bushewa: bushewa saman ≤ 8h, bushewa mai ƙarfi ≤ 24h (misali ma'auni: GB/T1728-79)

Gina fenti

  • Bayan bude ganga, dole ne a motsa shi daidai, a bar shi ya tsaya kuma ya girma na tsawon minti 30, sa'an nan kuma ƙara adadin da ya dace na bakin ciki da daidaitawa ga dankowar ginin.
  • Diluent: diluent na musamman don jerin alkyd.
  • Airless spraying: Dilution adadin ne 0-5% (ta nauyi rabo na fenti), bututun ƙarfe caliber ne 0.4mm-0.5mm, spraying matsa lamba ne 20MPa-25MPa (200kg/cm²-250kg/cm²).
  • Air spraying: Dilution adadin ne 10-15% (ta nauyi rabo na fenti), bututun ƙarfe caliber ne 1.5mm-2.0mm, spraying matsa lamba ne 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
  • Nadi shafi: Dilution adadin ne 5-10% (ta fenti nauyi rabo)

Ma'ajiyar sufuri

  • Ya kamata a adana samfurin a wuri mai sanyi da iska, an kiyaye shi daga hasken rana kai tsaye, kuma a keɓe shi daga tushen ƙonewa, nesa da tushen zafi a cikin ɗakin ajiya.
  • Ya kamata a hana samfurori daga ruwan sama, hasken rana, guje wa karo lokacin da ake jigilar su, kuma ya kamata su bi ka'idodin da suka dace na sashen zirga-zirga.

FAQ abokin ciniki

faq

● Shin yana da sauƙi a yi fenti mai launin fari da launin ruwan sama bayan shafan jan ƙarfe na rigakafin tsatsa?
A: A'a, ba shi da sauƙi. Ana buƙatar ƙarin riguna biyu na topcoat.

Za a iya amfani da rigar saman a kan filastik, aluminum da galvanized saman?
A: Ba za a iya amfani da enamels na alkyd na al'ada a saman saman da ke sama ba.

Hankali

  • A cikin yanayin yanayin zafi mai girma, mai sauƙin bushewa, don guje wa bushewar bushewa za a iya daidaita shi da bakin ciki har sai ya bushe.
  • ƙwararrun ma'aikatan fenti ya kamata su yi amfani da wannan samfurin bisa ga umarnin kan fakitin samfurin ko wannan jagorar.
  • Duk sutura da amfani da wannan samfur dole ne a aiwatar da su daidai da duk ƙa'idodin kiwon lafiya, aminci da muhalli masu dacewa.
  • Idan kuna shakka ko ya kamata a yi amfani da wannan samfurin, da fatan za a tuntuɓi sashen sabis na fasaha don cikakkun bayanai.

Kariyar tsaro

  • Ya kamata wurin da ake ginin ya kasance da iska mai kyau kuma masu fenti su sanya tabarau, safar hannu, abin rufe fuska, da sauransu don guje wa haɗuwa da fata da shakar hazo na fenti.
  • An hana hayaki da wuta sosai a wurin ginin.