Samfurin kuma an san shi da
- AlkyD mai launin shuɗi mai launin shuɗi, alkyd redded matsakaici fenti, alyd mai launin anticorrosive shafi, Alkdd mai ruwa mai narkewa.
Sigogi na asali
| Sunan Ingilishi | Alkyd ja fenti na ja |
| Kayan haɗari A'a. | 33646 |
| UN No. | 1263 |
| Kwayoyin halitta na kwayar cuta | 64 daidaitaccen metre³. |
| Iri | Fenti na Jinhuu |
| Model No. | C52-3-1 |
| Launi | M |
| Hadawa da rabo | Guda kayan aiki |
| Bayyanawa | M farfajiya |
Tsarin samfuri
- Alkyd redddan antirust fenti wani fenti na daya ne wanda ya hada da alkama, mai kara, anteres, a'a, manretytic wakili.
Kaddarorin
- Fim na fenti yana da wahala, ƙulli mai kyau, kyakkyawan ƙulli ne, zai iya jure tasirin bambancin yanayin.
- Karfin cika ƙarfin.
- Kyakkyawan aiki mai kyau, ingantaccen haɗe tare da alkyd saman riguna.
- Kyakkyawan aiki.
- Karfi m, kaddarorin kayan aikin.
- Babban abun ciki, kyakkyawan yashi mai kyau.
- Anti-flaging fenti na fenti, kyakkyawan kariya na kariya, mai kyau haske da riƙe launi, launi mai haske, ɗoruwa mai kyau.
Sigogi na fasaha: GB / T 25251-2010
- Halin a cikin akwati: Babu dumbin ducks bayan motsawa da hadawa, a cikin jigo.
- Addis: Na farko aji (Standard Index: GB / T1720-1979 (89))
- Kyakkyawan: ≤50um (daidaitaccen index: GB / T6753.1-2007)
- Gamshin ruwan gishiri: 3% Nacl, 48h ba tare da fatattaka ba, kumburi, peeling (daidaitattun ƙayyadaddun (GB / T9274-88)
- Lokacin bushewa: bushewa
Amfani
- Ya dace da farantin karfe, farfajiya na inji, face mai bututun ruwa, kayan aiki, farfajiya.
Jiyya na jiki
- M karfe farfajiya a Sandblasting zuwa Sa2.5 sa, surface na 30um-75um.
- Kayan aikin lantarki da ke daƙasa ga ST3 sa.
Faji na Faji
- Bayan buɗe ganga, dole ne a tayar da shi a ko'ina, an bar shi ya tsaya da balaga don 30min, sannan a ƙara adadin da ya dace da kuma daidaita zuwa ga danko.
- Dilugar: Dillique na musamman ga jerin alkyd.
- Airless spraying: Rumute adadin shi ne 0-5% (ta hanyar nauyi a Clieber shine 0.4mm-0.5mm, clining / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg / cm²-250kg
- SPRaying na iska: Yawan tsayuwa shine 10-15% (ta hanyar nauyin fenti) shine 0.3m-2.0mm, clinding matsin lamba 1.4mk / cm²-4kg / cm²-0.4mg / cm²-4kg / cm²-0.4mg / cm²-4kg / cm²-0.
- Roller / diluterididdigar adadi shine 5-10% (ta hanyar zane mai nauyi)
Pre-zanen lokaci
- Dogara kai tsaye a farfajiya na ƙarfe wanda ƙimar da ke daidai yake zuwa Sa2.5.
Back manufa daidai
Alkyd iron irir matsakaici, alyd fenti.
Sigogi masu gini
| Yawara da aka ba da shawarar fim na fim | 60-80um |
| Lambar da aka ba da shawarar zanen tana wucewa | 2 ~ 3 wuce |
| Zazzabi mai ajiya | -10 ~ 40 ℃. |
| Tsarin gini | 5 ~ 40 ℃ |
| Lokacin gwaji | 6h |
| Hanyar gini | Goge, feshin iska, ana iya amfani da mirgine. |
| Sashi na ka'idar | Kimanin. 120g / M² (bushe bushe, ban da asara). |
| Substrate zazzabi dole ne ya fi girma na 3 ℃, lokacin da zazzabi ya zama ƙasa da 5 ℃, fim ɗin ba a warke ba, bai dace da ginin ba. | |
Matakan kariya
- A cikin tsirar zafin jiki, mai sauƙin bushewa, don guje wa bushewar bushe feshin za a iya gyara shi da bakin ciki har sai ba bushe fesa.
- Ya kamata a yi amfani da wannan samfurin ta hanyar zanen zanen ƙwararru gwargwadon umarnin akan kunshin samfurin ko wannan littafin.
- Dukkanin kayan haɗin gwiwa da amfani da wannan samfurin dole ne a aiwatar da shi daidai da duk lafiyar da ta dace, aminci da ƙa'idodi da ƙa'idodi.
- Idan cikin shakka kamar ko don amfani da wannan samfurin, tuntuɓi sashen sabis ɗin fasaha don cikakkun bayanai.
Marufi
- 25KG Dru
Sufuri
- Ya kamata a adana samfurin a cikin wuri mai sanyi da Ventilated, wanda ke cikin ware daga hanyoyin da ke cikin wuta, nesa da tushen zafi a cikin shago.
- A lokacin da jigilar kayayyaki, ya kamata a hana shi daga ruwan sama, bayyanar hasken rana, ka guji karo, kuma ya kamata bi ka'idodin da suka dace na sashen zirga-zirga.
Kariyar tsaro
- Dole ne ginin aikin gini ya kamata ya sami kayan iska mai kyau, da masu zane ya kamata su sa tabarau, safofin hannu, da sauransu don guje wa tuntuɓar fata da inhalation na fenti.
- Ana hana shan sigari da wuta a cikin shafin ginin.
