Hakanan aka sani da
- Polyurethane baƙin ƙarfe ja fari, polyurethane baƙin ƙarfe ja anti-lalata primer, polyurethane baƙin ƙarfe ja fenti.
Mahimman sigogi
| Kaya Masu Hatsari No. | 33646 |
| Majalisar Dinkin Duniya No. | 1263 |
| Halin kaushi volatilisation | 64 misali m³ |
| Alamar | Jinhui Paint |
| Samfura | S50-1-3 |
| Launi | Iron ja |
| rabon hadawa | Babban wakili: wakili mai warkarwa = 20: 5 |
| Bayyanar | Flat da santsi surface |
Sinadaran
- Polyurethane (pu) baƙin ƙarfe oxide ja anticorrosive coatings (Polyurethane (pu) baƙin ƙarfe oxide ja anticorrosive coatings ya ƙunshi hydroxyl-dauke da resins, baƙin ƙarfe oxide ja, antirust pigmented fillers, Additives, kaushi, da dai sauransu, da kuma wani biyu-bangaren polyurethane iron oxide red polyurethane iron oxide red polyurethane.
Halaye
- Good antirust Properties
- Kyakkyawan mannewa ga karfe da aka bi da shi
- Kyakkyawan maganin ƙarancin zafin jiki
- Kyakkyawan ruwa da juriya na lalata
- Fast bushewa da kyau mai juriya.
Sigar fasaha (bangare)
- Constructability: babu cikas ga aikace-aikace
- Siffar fim: al'ada
- Juriya na ruwan gishiri: babu fatsawa, babu blister, babu kwasfa (misali: GB/T9274-88)
- Juriyar acid: babu fashewa, babu blister, babu kwasfa (daidaitaccen ma'auni: GB/T9274-88)
- Matsayi a cikin akwati: babu lumps mai wuya bayan motsawa da haɗuwa, a cikin yanayi iri ɗaya
- Juriya na lankwasawa: 1mm (misali ma'auni: GB/T1731-1993)
- Tasirin juriya: 50cm (Ma'auni na yau da kullun: GB/T4893.9-1992)
- Juriya na Alkaki: babu fashewa, babu buguwa, babu kwasfa (daidaitaccen ma'auni: GB/T9274-88)
- Lokacin bushewa: bushewa saman ≤ 1h, bushewa mai ƙarfi ≤ 24h (misali ma'auni: GB/T1728-79)
Maganin saman
- Karfe saman sandblasting jiyya zuwa Sa2.5 grade, surface roughness 30um-75um.
- Kayan aikin lantarki suna raguwa zuwa matakin St3.
Kunshin riga-kafi
- Kai tsaye fentin a saman karfe wanda ingancin cire tsatsa ya kai darajar Sa2.5.
Bayan daidaitawa
- Polyurethane mica fenti, polyurethane fenti, acrylic polyurethane saman gashi, saman gashin fluorocarbon.
Amfani
- Ya dace da tsarin karfe, tankunan mai, tankunan mai, kayan aikin rigakafin sinadarai, kayan aikin lantarki, motocin jigilar kayayyaki azaman suturar ƙoshin ƙoshin lafiya.
Gina zane
- Wani sashi bayan buɗe ganga, dole ne a motsa shi da kyau, sannan a ƙarƙashin motsawa bisa ga daidaitattun buƙatun ƙungiyar B a cikin sashin A, cikakke gauraye, a tsaye, dafa 30min, ƙara adadin da ya dace na bakin ciki, daidaitawa ga dankowar gini.
- Diluent: diluent na musamman don jerin polyurethane.
- Airless spraying: Dilution adadin ne 0-5% (ta nauyi rabo na fenti), bututun ƙarfe caliber ne 0.4mm-0.5mm, spraying matsa lamba ne 20MPa-25MPa (200kg/cm²-250kg/cm²).
- Air spraying: Dilution adadin ne 10-15% (ta nauyi rabo na fenti), bututun ƙarfe caliber ne 1.5mm-2.0mm, spraying matsa lamba ne 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
- Nadi shafi: Dilution adadin ne 5-10% (cikin sharuddan fenti nauyi rabo).
Matakan kariya
- A cikin yanayin yanayin zafi mai girma, mai sauƙin bushewa, don guje wa bushewa za a iya daidaita shi tare da bakin ciki har sai ya bushe.
- ƙwararrun ma'aikatan fenti ya kamata su yi amfani da wannan samfur bisa ga umarnin kan fakitin samfur ko wannan jagorar.
- Duk sutura da amfani da wannan samfur dole ne a aiwatar da su daidai da duk ƙa'idodin kiwon lafiya, aminci da muhalli masu dacewa.
- Idan kuna shakka ko ya kamata a yi amfani da wannan samfurin, da fatan za a tuntuɓi sashen sabis na fasaha don cikakkun bayanai.
Ma'ajiyar sufuri
- Ya kamata a adana samfurin a wuri mai sanyi da iska, kariya daga hasken rana kai tsaye, kuma a keɓe shi daga tushen ƙonewa kuma a nisanta shi daga tushen zafi a cikin ɗakin ajiya.
- Ya kamata a kiyaye samfuran daga ruwan sama, hasken rana da karo lokacin da ake jigilar su, kuma yakamata su bi ƙa'idodin da suka dace na sashin zirga-zirga.
